Using Snow Roof Rakes


Visitors: 405

Removing snow from your roof is not the same as the removing snow from your garden. Where there is a possibility of snow, the roofs are made inclined and this is a major reason why the mechanical tools cannot be used by the house-owner. Either he has to use manual tools or he has to call for an expert in roof raking. Fortunately, the gravity works for the house-owner and if the snowfall is not continuous and long lasting, the nature itself would melt the snow and a minor effort on part of house-owner will ensure that no ice collects on the roof.

Roof Rakes Are Made Of Aluminum Or Hard Plastic

For roof raking aluminum ladder and roof rakes are required. The roof rakes are attached at the end of a tube. They are made of aluminum or hard plastic. Aluminum is preferred over plastic as they are not as tough as the aluminum ones. Aluminum ladder is necessary, as roof is slippery, inclined and thus not safe for access. Whatever portions can be reached with the help of the tube extensions, are cleared of collected snow and the other portions left out in as is condition. Chemical deicers if available in market can be used.

Safety In Roof Raking

Do not do the following when clearing the snow from roof
1. Never ever, climb on the roof to clear the snow. All the ingredients for an accident are present the roof. A slippery surface and slope are sufficient for hurtling you downwards.
2. Do not work on the snow by mechanical means, that means no pounding or chopping
3. Aluminum ladder should have a firm footing, and it should be anchored firmly. It should not topple down.

Roof Raking Alternatives

To reduce the manual effort required in roof raking and removing snow from roof, roof and gutter de-icing cable can be installed on the roof. This has to be installed on the roof in a zigzag pattern and parallel to the gutter. A controller situated in your house will ensure that the temperature of the area under the cable does not get hot.

Andrew Caxton is the webmaster and succesful author of many articles published at . A guide on lawn mowers and garden tractors and how to choose the right type for your garden; including snow removal tools for the winter season, such as snow blowers(throwers), shovels, salt spreaders or roof rakes amongst other garden equipment for gardening and lawn care.


Article Source:

Rate this Article: 
Manufactured Roof Trusses Vs Conventional Roof Framing
Rated 4 / 5
based on 5 votes

Related Articles:

Snow Roof Rakes To Clear Your Roof

by: Andrew Caxton (April 10, 2007) 
(Home Improvement)

Why Your Roof Needs Bolt Down Snow Fences

by: Bruce Markey (September 08, 2014) 
(Home Improvement/Flooring)

Snow Guards for Metal Roofs – A Boon to Snow Prone Areas

by: Bruce Markey (April 23, 2015) 
(Home Improvement/Roofing)

Snow Rally Training: A Fun Way To Learn Driving on Snow

by: Fahad Hizam (January 01, 2011) 

Tricks For Removing Snow Easily Using Snow Throwers

by: Andrew Caxton (November 15, 2005) 
(Home Improvement)

Prevent Roof Leakage By Hiring The Best Roof Installation Service Provider

by: Clarissa Meghan (June 10, 2014) 
(Home Improvement/Roofing)

Copper Roof Nassau County – Replace your roof when it is damaged

by: Sturatm Mitchel (June 01, 2009) 
(Home Improvement)

The Science of Snow for Used to Make a Snow Sculpture

by: Bruce Markey (November 30, 2011) 
(Arts and Entertainment/Visual Graphic Arts)

Cedar Roof Westchester – Renovate your roof in a royal way

by: Sturatm Mitchel (June 01, 2009) 
(Home Improvement)

Manufactured Roof Trusses Vs Conventional Roof Framing

by: Rickie Bell (September 14, 2008) 
(Home Improvement/New Construction)