Quilling is an ancient art in the history of human society. We see different definitions regarding the concept of ‘quilling. ’ To put it in the simplest terms, we have defined it as:
“Quilling is the art of creating decorative designs from thin strips of curled paper. ”
Quilling paper is available on the consumer market in over 250 colors and dimensions. It can be divided into various categories, like solid colored Quilling paper, graduated Quilling paper, two-tone Quilling paper, acid free Quilling paper and other assorted parcels of Quilling paper. It is available in various dimensions, such as 1/8”, ¼” and 3/8 broad paper parcels.
Acid-Free Quilling paper:
As the name clearly indicates this is a paper that is completely acid free. The quality makes it an outstanding choice for making scrapbooks, rubber stamping, and creating frames for pictures. It assures your project will last a lifetime, without any side effects on the framed picture or album.
Graduated Quilling Papers:
This type of paper provides you an exceptional look to your decorative quilling projects. On the edges, you will have a solid, concrete color but gradually, it will fade to white. It is the nature of the quilling ring, that, when using a graduated paper, it begins with a dark shade but ends up being faded to a lighter side. On the contrary, some graduated papers begin as white, or a lighter shade, and then slowly fades into a solid, darker color.
Two-Tone Quilling Papers:
This is another important type of quilling paper. It is quite similar to the graduated quilling paper in its use. The look consists of a concrete color on one side and comparatively lighter color on the other side. Although, with two-tone paper, the color remains same, however, the intensity of color is different. The main use of this quilling paper is to provide a desired level of softness to the quilled subject. It possesses the capacity to quill many papers in a single spiral.
For an in-depth look at the concept of quilling, make sure that you possess some important tools. First, you need a quilling tool, or a toothpick, in order to cover up your paper in a rounded mode. Obtain some tweezers and a paper cutter. You can use cardstock for the cutting paper.
Avoid using a thick paper in order to avoid wrinkling during the process of rolling.
Ensure the strips smoothness and uniformity in their width.
If making white flowers, follow the instructions below carefully. Use a 4” strip that is ¼” wide for every petal. Then, roll it firmly, and allow it to loosen itself. In order to make the grip better, use Zig 2-way, or Sailor. Do not loosen the grip until it is properly dried. During the process of rolling your pieces or strips, use tweezers. After all the spirals are finished, pinch the contrary surfaces similar to a football figure. Keep the length of the core point roughly ½” You can place 6 petals on each flower.
Just before you affix them to the page, it is best to create a tiny pond of gum, or glue, on a piece of wide cardstock. With the help of tweezers, set it on the page without touching the bottom of the spiraled figure to the glue.
Place it vigilantly without leaving any paste marks on the paper.
While creating larger figures, always employ a 12” strip, rolled tight. After that, take off the pressure and let it relax a little bit. In case of a ‘sun’ figure, rays must be roughly 6” strips. Roll them in a firm manner in contrasting directions on each side, nearly 1 inch. You can twist the middle area with your hands.
If you'd liked to make heart flowers, use 4” strip or larger, depending upon the specifications you choose. These strips must be in a half-twisted mode and spiraled in the interior to the core point on each surface. Now, free the spiral from pressure until they become the size you want.
Usually, leaves and stems are rounded by hand. Pull them gently, calmly by the glue and put it in the proper position.
Ensure that you use equally rolled spirals. If possible, place your finger at the peak point of the spiral during the rolling process.
Avoid pasting too much glue. It will leave marks and mess up the beauty of the final product.
If you trim the strips yourself, there is a chance of having uneven dimensions. Avoid doing that. Make sure that you have the same width so that you get the same sized flowers.
Paste the glue over the coils carefully. It will save you from unrolling the coil and pasting the glue again.
Teresa Leys is the author of the highly popular Quilling Success . For more information please visit Quilling Success .