Stripping a surface clean is not an easy task. Trying to do it manually can not only damage the surface in question, but it is also a painstakingly slow process. Removing large amounts of paint, rust and other materials must be done using some other method.
For a long time, the method in question was sandblasting. Businesses and homeowners would request sandblasting when they needed their surface cleaned off. But sandblasting brings a whole set of issues that are not pleasant. It is why dustless blasting has now taken over as the best way to strip a surface clean. Here are its key advantages and features.
What is Dustless Blasting?
The concept of dustless blasting is to take an abrasive and combine it with water. The mixture is then blasted onto a surface for paint removal, line marking removal or graffiti removal. It can even be used on heavy machines or other such items.
Compared to sandblasting, dustless blasting is a lot simpler and cleaner. Since there is water involved, the mixture ensures that sand is not spreading out into the air when the surfaces are cleaned.
No Health Risks
One of the main concerns with using sandblasting for paint or rust removal is the fact that it presented health risks. The high temperature combined with pushing so many materials into the air meant the work area was unsafe. It would often take one or two days for the dust to settle, before people could go back into those rooms and resume other work.
If you are using dustless blasting for line marking removal or graffiti removal, such problems are not relevant. The water ensures that barely any dust will go into the air. Most dustless blasting operations are very clean, which means that your workers can step foot into the room minutes after the blasting process is completed.
Faster and More Efficient
Dustless blasting is the quickest way to remove paint, rust and other items from a surface. It is also the most efficient, as it uses much less abrasive compared to sandblasting. Most dustless blasting projects are one within one or two hours, especially if the company has a large van with all their equipment.
Even a project such as stripping an entire car, which would be a gigantic mess with sandblasting, can be completed easily. It is done within a couple hours with dustless blasting, with maybe four bags of a recycled glass abrasive. If you use a little more abrasive, it can be done even quicker.
Remember those instances of materials being warped because of the heat associated with sandblasting? Such an event does not take place with dustless blasting, as the temperature is much lower. The mix of water and abrasive ensures those high temperatures are not making contact with the surface, leaving it warp free!
If you are interested in getting your walls, floors, roads or other surfaces stripped for repainting or refinishing, it is a good idea to get a dustless blasting service in the Melbourne area.