Carpet stains can be very hard to remove. But if you treat them promptly with the right cleaning solutions, they will eventually come out and you will avoid spending money on professional carpet cleaning services. Today, most carpets are made to resist stains, which makes the carpet stain removal easier. However, it is important to tackle the stain before it has dried and set into the carpet fibres, otherwise, the stain removal may become impossible. Here are a few tips on how to make carpet stain removal easier.
If someone spills red wine on your carpet, don't panic but quickly blot up the spill with paper towels and a small amount of white wine. White wine works great on red wine stains, making the stain disappears magically. However, if white wine is not available, you can use a mixture of one part white vinegar and two parts water instead. To remove any remaining traces of the tannin stain, use a solution of 1 part detergent and 2 parts water. Once the stain is gone, rinse thoroughly with plain water and blot dry with paper towels. Cleaners Regents Park recommend extracting as much of the moisture before leaving the carpet to dry completely.
For removing pet stains, try a mild ammonia solution. Use paper towels to remove any solid waste, then spray the stained area with a solution of 1 tablespoon of clear ammonia and ½ cup of water. Dab at the area repeatedly with paper towels to remove the pet stain. Pour a detergent solution ( the one suggested for red wine) on the affected area to neutralize the ammonia in the carpet, then rinse with clear water and soft cloth. Again, absorb as much of the moisture in the carpet as possible.
If you notice an ink stain on your carpet, cleaners Regents Park advise tackling it immediately. Ink stains are one of the toughest to remove and the sooner you treat it, the easier you will get rid of it. To deal with an ink stain on a carpet, end of tenancy cleaning Regents Park experts suggest using a small amount of rubbing alcohol. Avoid using too much alcohol, as this can ruin the colours of your carpet. Spray plain water on the spot and blot dry to rinse the area. If necessary, repeat the process.