Planning Your In-Wall Speaker System

 


Visitors: 828

So you’ve finally decided to get your favorite music throughout your house. What’s next? Where do you go from here? That depends upon your requirements and weather this will be an installation in an existing home or a music system in a new construction home.

First, you need to decide which rooms you would like to install your speakers. The installation will obviously be much easier during construction than in an existing home. Once you make the decision on which rooms to include, you have two choices; in-wall or in-ceiling.

In-ceiling speakers tend to draw less attention to themselves. In all but basic background music applications, in-wall speakers usually sound better, everything else being equal. In-wall speakers have other problems, however. They are usually harder to integrate aesthetically in the room. They also take up valuable wall space that can be used for art or furniture.

Typically, round speakers are used for in-ceiling installations and rectangular speakers are used when installing in the wall. Round speakers integrate better with other ceiling fixtures, such as smoke detectors and recessed light cans, which tend to be round as well. In addition, because most round speakers have coaxially located drivers, you are the same distance from both no matter where you are in the room. This leads to more even frequency response throughout the room. Rectangular speakers tend be better suited to in-wall, rather than in-ceiling, applications.

It is best to keep the speakers two feet or so from adjacent walls or other boundaries that can cause response problems. Optimally, in wall speakers should be at, or close to, ear level. Place in-ceiling speakers so they are symmetrical with ceiling fixtures and the room.

Usually stereo pairs of speakers are used in each room. Another approach that works well is to sum the some signals into mono. You can then run the system in mono for most areas that use in-ceiling speakers. The mono approach allows you to get more uniform coverage, rather than standing under a speaker that is only playing the left channel for example.

You can also use one speaker for areas like small bathrooms and still get both channels of the music. There are speakers with dual voice coils and inputs for both the left and right channels on a single speaker that are also used for this type of application. It can be demonstrated that the summed mono approach using a single, standard voice coil speaker usually sounds better, however.

Multi-room speaker systems can be set up as single zone or multiple zone systems. In a single zone system, all the speakers play the same source. With a multi-zone audio system, the system is divided into two or more areas that can play different sources. This flexibility is really nice when different occupants want to listen to different music at the same time. For example, with a three zone system, you could listen to three different sources simultaneously in three different areas of your house.

With a single zone system, it is still desirable to have independent volume control over each pair of speakers or to turn off any pair completely. This is accomplished by using a speaker level volume control for each room. These are usually a just round knob, although other styles, such as sliders, are used as well.

Multi zone systems are usually controlled by some type of keypad, system remote control, or wall mounted touchscreen. Typically, there is one of these control interfaces for each zone. There is an old saying in racing “Speed costs money. How fast do you want to go?" So it is with multi zone music system controls. Control costs money. How much do you want?

A standard knob style volume control is under $100. Step up to a keypad for more control and you are looking at $250 to $500. Touch screen controls offer the ultimate in simplicity and flexibility. In addition, touch screens allow feedback, such as volume, radio station, and music server information, to be displayed on the touch screen. Touch screen controls begin at about $500 and can go to $20,000 each, depending upon size and options. The more sophisticated controls allow you to turn on your music and choose sources from each room. It’s as easy as turning on a light.

Some of the more advanced controls can operate independently, while some require a central processor. If you are installing a multi zone system, you will need a multi room controller and amplifier. These can be integrated into one component or they can be separate pieces. Prices on these vary widely. It is better for most people to contact a professional custom installer for installation of these type of components.

There are a number of decisions to make when planning your in-wall speaker system. Do you want single or multi zone? In-wall or in-ceiling? Both? What type of controls would you like? You can research these questions on your own or consult a qualified professional for assistance. With careful planning you will have a music system you can enjoy for years to come.

Steve Faber has almost 15 years in the custom installation industry. He is a CEDIA certified designer and Installer 2 with certifications from both the ISF and THX. His experience spans many facets of the industry, from the trenches as an installer and control systems programmer, and system designer, to a business unit director for a specialty importer of high end audio video equipment, a sales rep for a large, regional consumer electronics distributor, and principal of a $1.5M+ custom installation firm. Steve is currently is senior sales engineer for Digital Cinema Design, a CEDIA member firm in Redmond, WA. He is on the web at The Home Theater and Automation Guide

(988)

Article Source:


 
Rate this Article: 
 
Planning a Car Audio System Installation
Rated 4 / 5
based on 5 votes
ArticleSlash

Related Articles:

How to Choose a Home Speaker System

by: Geras Long (March 17, 2011) 
(Shopping and Product Reviews/Electronics)

Why Upgrade Your Car Speaker System?

by: Sebastian Schneider (March 26, 2006) 
(Automotive/Mobile Audio Video)

Best home theater speaker system - a guide

by: Kenneth Maclennan (October 02, 2011) 
(Shopping and Product Reviews/Electronics)

The Best Desktop iPod Speaker System Models

by: Thomas Martinez (March 09, 2008) 
(Computers and Technology/Personal Tech)

Beneficial home theater speaker system

by: Suresh Dinakaran (March 26, 2011) 
(Shopping and Product Reviews/Electronics)

How to Find the Best Home Theater Speaker System at the Best Price

by: Brian Stevens (August 17, 2006) 
(Communications/Satellite TV)

Speakers Logitech AudioHub Notebook Speaker System

by: Kevin Reynolds (July 03, 2008) 
(Shopping and Product Reviews/Electronics)

Speaker Grille to Protect the Driver Element and Speaker Internals

by: Thomas Scott (September 09, 2010) 
(Arts and Entertainment/Music)

Planning a Residential Media System

by: Avery Miller (July 19, 2010) 
(Business)

Planning a Car Audio System Installation

by: Will Reece (September 21, 2005) 
(Automotive/Mobile Audio Video)