How to Properly Remanufacture Your HP 4500 Color LaserJet Toner Cartridges In Just 14 Easy Steps

 


Visitors: 335

Hewlett Packard Color LaserJet toner cartridges and supplies are the only supplies that have been specially designed, engineered and formulated to work together with the HP Color LaserJet 4500 and 4550 series printers to ensure consistent color and optimum output every time you print.

Step-by-Step “How-to-Remanufacture Your HP 4500/4550” Instructions:

Let’s get straight to the point, no beating around the bush during this lecture.

First, you will need the necessary Tools & Supplies Required:

Tools & Supplies Required:

  • #1 Phillips Head Screwdriver (tool)
  • Phillips Head Jeweler’s Screwdriver (tool)
  • Small Flat Blade Screwdriver (tool)
  • Cartridge Clip Remover (tool)
  • Needle nose Pliers (tool)
  • Mag Roller Sleeve Cleaner (supply)
  • Soft Cleaning Wipes (supply)
  • Vacuum or Compressed Air (supply)

    Below are your 14 easy steps to know how to remanufacture your HP 4500/4550 color LaserJet cyan, magenta, and yellow toner cartridges.

    Here you will also be provided with the OEM information part numbers;

    Part #’s:

  • C4192A = Cyan
  • C4193A = Magenta
  • C4194A = Yellow

    Step #1:

  • Carefully remove the contact pin from the cartridge by disengaging the locking tab. Insert a hook tipped tool in the end-cap opening and compress the locking tab, releasing the contact pin for removal.

    Step #2:

  • Take a small flat blade screwdriver and release the shutter lock from the opposite end of the cartridge.

    Step #3:

  • Elongate the shutter just enough to disengage the drive hub.

    Step #4:

  • Simply remove the two pairs of screws from both end caps.

    Step #5:

  • Gently remove both end caps.

    Step #6:

  • Next, remove the gears, contacts and bushings.

    Step #7:

  • Remove the developer roller sleeve as shown. Neatly clean the sleeve with some mag cleaner, anhydrous ethanol or other non-filming solvent.

    Step #8:

  • Now, remove the four screws which retain the doctor blade and containment roller (two which are very small and require a Phillips head jeweler’s screwdriver).

    Step #9:

  • Remove the doctor blade assembly. The doctor blade is very fragile and handling should be minimized (air blow and wipe with soft cleaning wipes). Inspect the blade edge for wear and replace with a new part if needed.

    Step #10:

  • Now you will need to remove the fill plug.

    Step #11:

  • Neatly, clean out the cartridge with dry compressed air. Insure that the foam toner adder roller is as clean as possible.

    Step #12:

  • After cleaning the hopper and all parts, reassemble the cartridge for the fill plug, end cap and contact pin.

    Step #13:

  • Firmly, hold the developer roller sleeve in position, fill the cartridge with toner.

    Step #14:

  • Install the fill plug and end cap (two screws) after removing stray toner from the filling step and snap the contact pin into cartridge.

    This information is provided to you to both educate and improve your knowledge in the technical area within the remanufacturing industry.

    In description of, Joseph Mercado is known as The Internet Marketing Tyrant. He specializes in the consumable market involving studies on inkjet cartridges. Joseph is also a respected Marketing Innovator who seeks his own innovative mind to construct proven ink formulas designed to leave major impacts within this cartridge industry.

    I'm a highly aggressive individual who is constantly seeking success. My assertiveness has brought me to a level of excellence within my marketplace.

    I've been driven to the point of non-failure and as a result I progress daily while conquering defeat. My intense innovations which are derived from my mind have sculptured and molded a defined marketer such as myself.

    In addition, my expertise is far more than geared to establish a market with inkjet cartridges the size of the once called continent Pangea. You can judge me as a Motivational Marketing Mechanic.

    http://www.inksecrets.com

  • (721)

    Article Source:


     
    Rate this Article: 
     
    Must Know Facts About Toner Cartridges
    Rated 4 / 5
    based on 5 votes
    ArticleSlash

    Related Articles:

    How To Properly Remanufacture Your HP 2500-2550 Color Toner Cartridges In Just ..

    by: Joseph Mercado (December 02, 2005) 
    (Computers and Technology/Hardware)

    How To Properly Remanufacture Your Own Lexmark Optra T-S-SE Toner Cartridges - ..

    by: Joseph Mercado (December 02, 2005) 
    (Computers and Technology/Hardware)

    How To Properly Remanufacture Your Own HP C6578D Color Printer Inkjet ..

    by: Joseph Mercado (December 02, 2005) 
    (Computers and Technology/Hardware)

    How To Properly Remanufacture Your Brother TN540 Toner Cartridges For The ..

    by: Joseph Mercado (December 02, 2005) 
    (Computers and Technology/Hardware)

    How To Properly Remanufacture Your HP Q1338A-Q1339A Black Toner Cartridge In ..

    by: Joseph Mercado (December 02, 2005) 
    (Computers and Technology/Hardware)

    How To Properly Remanufacture Your Hewlett Packard C4182X Toner Cartridge In ..

    by: Joseph Mercado (November 30, 2005) 
    (Computers and Technology/Hardware)

    How To Properly Remanufacture Your Lexmark 10N0026 Inkjet Printer Cartridges In .

    by: Joseph Mercado (December 02, 2005) 
    (Computers and Technology/Hardware)

    The Lowdown On Remanufactured HP 4500 Toner Cartridges

    by: Ben Pate (May 21, 2008) 
    (Computers and Technology/Hardware)

    Are Color Laserjet Printers Worth the Money?

    by: Stuart Simpson (September 16, 2005) 
    (Computers and Technology/Hardware)

    Must Know Facts About Toner Cartridges

    by: Rafi Michael (August 26, 2008) 
    (Computers and Technology/Hardware)